Dedicated to improving manufacturing efficiency

Compact, high-performance, and robust – the RS-PRO/RSF-PRO series screw compressors

 Screw compressor models of the RS-PRO/RSF-PRO series.

The focus when designing the screw compressor series RS-PRO and RSF-PRO in the power range of 3.0 to 55.0 kW, were the features high-performance compressed air supply with low space requirements and easily accessible maintenance parts.

RENNER screw compressors with asymmetric profile are designed for uncompromising industrial use. 

Today, oil-injected screw compressors enable the most modern and economical way of generating compressed air in the corresponding capacity range. RENNER fully relies on this compressor principle.

The RS-PRO and RSF-PRO 2-11,0 – 18,5 uses the new PRO air end generation, which achieves a significantly higher delivery rate. The improved drive belt wrap in combination with a motor rocker ensures more power, automatic belt tensioning and a long service life. Intensive cooling in combination with an aftercooler ensure the necessary operational reliability and a good air quality.

The RSF-PRO series is built with a radial fan as standard. The noise level is reduced to a minimum by the proven sound insulation box and the used radial fan.

From 7.5 kW, an external heat exchanger system for domestic hot or heating water can be optionally used. Integrated heat recovery is possible in the RS-PRO series from 11.0 kW. The compact dimensions, easily accessible maintenance areas, clearly arranged controls and low-noise and low-vibration operation make the screw compressors particularly user- and maintenance-friendly.

With a wide range of options and variants, the series offers the right solution for nearly every requirement. The optional frequency converter, for example, is separated from the machine by a partition wall and is thus optimally protected.

Energy efficiency is a matter of course at RENNER. All series operate extremely economically. Therefore, the most of our screw compressors are eligible for BAFA subsidies (Germany only). Up to 40% is refunded by the state for new and replacement investments in efficient compressors.

RENNER compressors:
Compressed air for applications of all kinds

Woodworking, metalworking, food processing companies, the automotive industry and many more – relied on RENNER compressors for years because reliability, robustness and energy efficiency are the fundamentals in compressed air technology. The medium-sized, family-run company offers economical compressed air systems for the ambitious craftsman, industry and trade. Especially in areas where reliable compressed air supply is required, the high-quality RENNER compressors are the first choice.

The RENNER secret of success:
Partnership, service-oriented, reliable and short lead times

Innovative strength and high-quality standards, coupled with a consistent focus on customer needs and a good price/performance ratio – this is the key to RENNER's success. Once you have purchased a RENNER compressor, you can be rest assure that you will receive a compact, robust, reliable and energy-efficient product specially tailored to your needs. In addition, you can take advantage of a servicing network of well-trained partners worldwide. This not only applies to the area of expertise, screw compressors, but also to piston compressors and oil-free compressed air – made in Germany.

Energy efficiency: a matter of course for RENNER compressors

Whether frequency-controlled, with refrigeration dryer, mounted on an air receiver or as a complete compressed air station: energy efficiency is a matter of course at RENNER. All series work extremely cost-efficient. RENNER has more than 6,000 customizable compressor models on offer. From the pressure level to the energy consumption – we adapt your compressor exactly to your needs.

The specialists for compressed air

Quality Made in Germany – that's RENNER! In 1994 Annette and Bernt Renner founded the company in Güglingen, Baden-Württemberg. What started out as a garage with three employees has since developed into an international company with over 180 employees in development, production, sales and administration in Güglingen and more than 20 employees in Bautzen.

RENNER compressors are manufactured with the most modern production processes in every size and finish. From small mobile piston compressors to large SCROLL and screw compressors for industrial installations in the power range from 1.5 to 355 kW, many systems optionally with variable speed control or direct drive – compressors from Güglingen are represented all worldwide. Accessories for compressed air complete the portfolio. Distribution is exclusively via the specialized trade.

The RENNER Team UK and Ireland will be happy to assist you:

Roy Dalton ∙ Sales Director
Mobile +44 7702 028442 ∙ r.dalton@renner-kompressoren.de

Matthew Dalton ∙ Sales Manager
Mobile +44 7538 931647  ∙ m.dalton@renner-kompressoren.de

www.renner-kompressoren.com

Company Information

Related Articles

New compact BOGE screw compressed air stations deliver big performance in small spaces

BOGE Compressors launches a selection of new screw compressed air stations to extend its popular C series. The innovative C4 (D)R to C15…

Compressors are compact and quiet

Boge has extended its C series screw compressors up to 22kW. The C15 to C30 provide a quiet, compact and efficient compressed air solution…

RENNER compressors: Compressed air for applications of all kinds

Woodworking, metalworking, food processing companies, the automotive industry and many more - relied on RENNER compressors for years…

Atlas Copco extends GA VSD+ compressor range up to 37kW

Atlas Copco Compressors has extended its innovative range of GA VSD+ oil-injected screw compressors launched in 2013 with the introduction…

Compressors help dairy reduce heating costs

Shropshire-based Müller Dairy, part of the Müller International group best known for its range of desserts and yogurts, has made…

Compressors cut energy usage

Two regulated-speed compressors from CompAir have helped Astrum, a steel components manufacturer, to cut its compressed air energy costs by…