Evaporative cooling or ‘adiabatic cooling’ is a mouthful, we know. That’s why a lot of building owners and operators still don’t know about the effectiveness of these systems and the cost and environmental benefits they can deliver.
Many people don’t realise that if you manage a large industrial or semi-industrial facility where pinpoint control of temperature isn’t crucial, evaporative cooling can actually be a more effective choice than traditional air conditioning. Plus, have a look at the pros and cons associated with the different system types below – not only is evaporative cooling cheaper and more efficient, it introduces fresh air from outside avoiding poor health issues often associated with traditional systems.
Colt International pioneered natural ventilation in the early 1930’s and has more climate control experts than anyone else in the industry. Over the last 10 years, we have applied all our experience and expertise to develop our CoolStream S.T.A.R range of evaporative coolers to give you more choice and control, when it comes to workplace temperatures and productivity.
Read on to find out what evaporative cooling is and why it could be better for your business than a traditional air conditioning system.
What is evaporative cooling and how does it work?
Evaporative cooling cools external air through water evaporation. It works via a two-step process, as outlined below.
Prior to being cooled through evaporation, the outdoor air is initially hot and relatively dry, and so the air has a high proportion of (red shown) so-called "sensible heat".
The primary process
As the airflow passes over the water, water evaporates into the air. The heat energy necessary for the evaporation is withdrawn from the air. The sensible air temperature decreases continuously. The evaporated humidity absorbed by the air is also referred to as "latent heat". Since the total energy of the air-water system remains the same with this exchange of sensible heat to latent heat, this type of evaporation is called "adiabatic" (taken from the Greek term for a change of state without the direct addition or removal of heat).
The secondary process
As the evaporative cooler cools down the air, the secondary phase is to remove the latent heat from the building. The temperature in the building falls as a result of the heat dissipation in the desired manner.
In the case of CoolStream, a special material is used to transport the water with many small channels through which flows the warm and relatively dry outdoor air, without having to have contact with droplets from the water distribution system. When passing through this wet medium the warm air is cooled considerably by the removal of sensible heat and this can then be used to cool down the building.
The temperature of the air passing through can be lowered by up to 15°C in Europe. In general, the hotter the weather, the more efficient the cooling is.
Good for the environment and your budget
Colt's CoolStream evaporative coolers are up to seven times more efficient than conventional air conditioning systems.
In one hour, CoolStream S.T.A.R systems consume only around 1 kW and 50 litres of water per 3m³/s of supplied air, providing up to 30 kW of cooling, depending on the configuration chosen. How is this achieved?
The EC fans that CoolStream systems use are inherently highly efficient. They operate at low power so they do not add heat to the airflow.
The system’s infinitely variable speed controls ensure that each unit operates using the least amount of electricity possible, ramping up and down only as required. As a result of their responding to demand, a reduction in energy use of up to 50% can be achieved.
Light on maintenance
CoolStream systems are reliable as they use proven, non-complex technology, which means that little maintenance is needed, saving you money in the long run.
Light on the environment
CoolStream systems run on water only and require no chlorofluorocarbons (CFCs) or similar refrigerants that are harmful to the environment. As a result they have no F-gas compliance issues. CoolStream’s inherent design automatically minimises water consumption. Depending on operating conditions, systems consume only around 50 litres of water per hour.
CoolStream systems have been extensively tested and are in compliance with VDI 6022 (“Hygienic Requirements for Ventilation Systems and Units for Internal Spaces”). This is a holistic and rigorous standard for air conditioning systems and confirms the high quality of supply air.
Commit to lower costs with evaporative cooling in 2019.
Colt offers a full design and installation service, as well as commissioning, training and servicing to ensure that your system is running safely and effectively. Talk to our experts today about our CoolStream S.T.A.R range.